Meets the ISO 11898-2:2016 and ISO 11898-5:2007 physical layer standards

Functional Safety-Capable

Documentation available to aid functional safety system design

’Turbo’ CAN:I/O Voltage range supports 3.3 V and 5 V MCUs

All devices support classic CAN and 2 Mbps CAN FD (flexible data rate) and "G" options support 5 Mbps

Short and symmetrical propagation delay times and fast loop times for enhanced timing margin

Higher data rates in loaded CAN networks

Ideal passive behavior when unpowered

Bus and logic terminals are high impedance (no load)

Power up/down with glitch free operation on bus and RXD output

Protection featuresReceiver common mode input voltage: ±30 V

HBM ESD protection: ±16 kV

IEC ESD protection up to ±15 kV

Bus Fault protection: ±58 V (non-H variants) and ±70 V (H variants)

Undervoltage protection on V_CC and V_IO (V variants only) supply terminals

Driver dominant time out (TXD DTO) - Data rates down to 10 kbps

Thermal shutdown protection (TSD)

Typical loop delay: 110 ns

Junction temperatures from –55°C to 150°C

Available in SOIC(8) package and leadless VSON(8) Package (3.0 mm x 3.0 mm) with improved automated optical inspection (AOI)capability

This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per second). Devices with part numbers that include the "G" suffix are designed for data rates up to 5 Mbps, and versions with the "V" have a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level. This family of devices comes with silent mode which is also commonly referred to as listen-only mode. Additionally, all devices include many protection features to enhance device and network robustness.