●Audio Performance (PVDD = 19 V, RSPK = 8 Ω, SPK_GAIN[1:0] Pins = 01) ○Idle Channel Noise = 100 µVrms(A-Wtd) ○THD+N = 0.03% (at 1 W, 1 kHz) ○SNR =105 dB A-Wtd (Ref. to THD+N =1%) ●Audio I/O Configuration: ○SingleStereo I²SInput ○Stereo Bridge Tied Load (BTL) orMono Parallel Bridge Tied Load (PBTL) Operation ○32, 44.1, 48, 88.2, 96 kHz SampleRates ●General Operational Features: ○Selectable Hardware or SoftwareControl ○Integrated Digital Output Clipper ○Programmable I²CAddress (1101100[R/W] or 1101101[R/W]) ○Closed-Loop Amplifier Architecture ○Adjustable Switching Frequency for Speaker Amplifier ●Robustness Features: ○Clock Error, DC, andShort-Circuit Protection ○Overtemperature and Programmable OvercurrentProtection  The TAS5760M is astereo I2S input device which includes hardware andsoftware (I²C) control modes, integrateddigital clipper, severalgain options, and a wide power supply operating range to enable use in a multitude of applications.The TAS5760M operates with a nominal supply voltage from 4.5 to24 VDC. An optimal mix of thermal performance and device cost is provided in the120-mΩ RDS(ON) of the output MOSFETs. Additionally, a thermally enhanced48-Pin TSSOP providesexcellent operation in the elevated ambient temperatures found in modern consumer electronicdevices. The entire TAS5760xx family ispin-to-pin compatible in the 48-Pin TSSOP package.Alternatively, to achieve thesmallest possible solutions size for applications where pin-to-pin compatibility and a headphone orline driver are not required, a 32-Pin TSSOP package is offered for the TAS5760M and TAS5760Ldevices. The I2C register map in all of the TAS5760xx devices areidentical, to ensure low development overhead when choosing between devices based upon system-levelrequirements.